Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_RC4 (GENERIC) #0: Thu Nov 8 00:11:53 PST 2007 builds@wb28:/home/builds/ab/netbsd-4-0-RC4/amd64/200711080452Z-obj/home/builds/ab/netbsd-4-0-RC4/src/sys/arch/amd64/compile/GENERIC total memory = 894 MB avail memory = 848 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 mainbus0 (root) cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1895.59 MHz cpu0: features: ffdbfbff cpu0: features: ffdbfbff cpu0: features: ffdbfbff cpu0: features2: 2001 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 512 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: 7f cpu0: AMD PowerNow! Technology 1900 MHz cpu0: available frequencies (Mhz): 800 1600 1800 1900 cpu0: calibrating local timer cpu0: apic clock running at 199 MHz cpu0: 8 page colors cpu1 at mainbus0: apid 1 (application processor) cpu1: not started ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 21, 24 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < INV,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured TOS1901 at acpi0 not configured acpibut0 at acpi0 (PNP0C0C): ACPI Power Button PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured PNP0C04 [Math Coprocessor] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 pcppi1: children must have an explicit unit midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 pckbc1 at acpi0 (PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 pckbc2 at acpi0 (SYN1909): aux port pckbc2: irq 12 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C01 [System Board] at acpi0 not configured PNP0103 [HPET Timer] at acpi0 not configured acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller acpiec0: io 0x62,0x66 acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method) acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch ACPI Object Type 'Power' (0x0b) at acpi0 not configured PNP0C0B [ACPI Fan] at acpi0 not configured acpitz0 at acpi0: ACPI Thermal Zone acpitz0: unable to get polling interval; using default of 30.0s acpitz0: active cooling level 1: 41.8C acpitz0: critical 102.0C pcppi1: attached to attimer1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pms0: Synaptics touchpad version 6.3 pms0: Up/down buttons, Palm detect, Multi-finger pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: ATI Technologies product 0x7910 (rev. 0x00) ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x7912 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 5 function 0: ATI Technologies product 0x791f (rev. 0x00) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 4 function 0: ATI Technologies product 0x7914 (rev. 0x00) pci2 at ppb1 bus 2 pci2: no spaces enabled! ppb2 at pci0 dev 5 function 0: ATI Technologies product 0x7915 (rev. 0x00) pci3 at ppb2 bus 8 pci3: i/o space, memory space enabled, rd/line, wr/inv ok re0 at pci3 dev 0 function 0pci_mem_find: void region : RealTek 8100E/8101E PCIe 10/100BaseTX (rev. 0x01) re0: interrupting at ioapic0 pin 17 (irq 5) re0: Ethernet address 00:a0:d1:84:6b:7d re0: using 256 tx descriptors rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb3 at pci0 dev 6 function 0: ATI Technologies product 0x7916 (rev. 0x00) pci4 at ppb3 bus 14 pci4: no spaces enabled! ixpide0 at pci0 dev 18 function 0 ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide0: bus-master DMA support present ixpide0: primary channel configured to native-PCI mode ixpide0: using ioapic0 pin 22 (irq 11) for native-PCI interrupt atabus0 at ixpide0 channel 0 ixpide0: secondary channel configured to native-PCI mode atabus1 at ixpide0 channel 1 ohci0 at pci0 dev 19 function 0: ATI Technologies product 0x4387 (rev. 0x00) ohci0: interrupting at ioapic0 pin 16 (irq 10) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1 at pci0 dev 19 function 1: ATI Technologies product 0x4388 (rev. 0x00) ohci1: interrupting at ioapic0 pin 17 (irq 5) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2 at pci0 dev 19 function 2: ATI Technologies product 0x4389 (rev. 0x00) ohci2: interrupting at ioapic0 pin 18 (irq 11) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ohci3 at pci0 dev 19 function 3: ATI Technologies product 0x438a (rev. 0x00) ohci3: interrupting at ioapic0 pin 17 (irq 5) ohci3: OHCI version 1.0, legacy support usb3 at ohci3: USB revision 1.0 uhub3 at usb3 uhub3: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ohci4 at pci0 dev 19 function 4: ATI Technologies product 0x438b (rev. 0x00) ohci4: interrupting at ioapic0 pin 18 (irq 11) ohci4: OHCI version 1.0, legacy support usb4 at ohci4: USB revision 1.0 uhub4 at usb4 uhub4: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered ehci0 at pci0 dev 19 function 5: ATI Technologies product 0x4386 (rev. 0x00) ehci0: interrupting at ioapic0 pin 19 (irq 11) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4 usb5 at ehci0: USB revision 2.0 uhub5 at usb5 uhub5: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 10 ports with 10 removable, self powered ATI Technologies product 0x4385 (SMBus serial bus, revision 0x14) at pci0 dev 20 function 0 not configured ixpide1 at pci0 dev 20 function 1 ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide1: bus-master DMA support present ixpide1: primary channel configured to compatibility mode ixpide1: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus2 at ixpide1 channel 0 ixpide1: secondary channel configured to compatibility mode ixpide1: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus3 at ixpide1 channel 1 azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 16 (irq 10) azalia0: host: 0x1002/0x4383 (rev. 0) azalia0: host: High Definition Audio rev. 1.0 pcib0 at pci0 dev 20 function 3 pcib0: ATI Technologies product 0x438d (rev. 0x00) ppb4 at pci0 dev 20 function 4: ATI Technologies product 0x4384 (rev. 0x00) pci5 at ppb4 bus 20 pci5: i/o space, memory space enabled fwohci0 at pci5 dev 6 function 0: Ricoh product 0x0832 (rev. 0x05) fwohci0: interrupting at ioapic0 pin 20 (irq 11) fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:08:0d:a0:d1:84:6b:7d fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset Ricoh product 0x0822 (SD Host Controller system, revision 0x22) at pci5 dev 6 function 1 not configured Ricoh product 0x0843 (miscellaneous system, revision 0x12) at pci5 dev 6 function 2 not configured Ricoh product 0x0592 (miscellaneous system, revision 0x12) at pci5 dev 6 function 3 not configured Ricoh product 0x0852 (miscellaneous system, revision 0x12) at pci5 dev 6 function 4 not configured pchb1 at pci0 dev 24 function 0 pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb2 at pci0 dev 24 function 1 pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb3 at pci0 dev 24 function 2 pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb4 at pci0 dev 24 function 3 pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 ioapic0: enabling timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) azalia0: codec[0]: 0x11c1/0x1040 (rev. 2.0) azalia0: codec[0]: High Definition Audio rev. 1.0 azalia0: codec[0]: No support for modem function groups azalia0: codec[0] has no audio function groups azalia0: RIRB time out azalia0: codec[3]: Realtek ALC268 (rev. 0.3) azalia0: codec[3]: High Definition Audio rev. 1.0 azalia0: playback: max channels=2, encodings=1 azalia0: playback: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz> azalia0: recording: max channels=2, encodings=1 azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz> audio0 at azalia0: full duplex, independent Kernelized RAIDframe activated wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) uhub5: port 6, set config at addr 2 failed uhub5: device problem, disabling port 6 boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)