NetBSD 1.4.2 (LAPTOP) #0: Wed Aug 9 12:29:08 BST 2000 cjep@brauer:/usr/src/sys/arch/i386/compile/LAPTOP cpu0: family 5 model 8 step c cpu0: AMD K6-2 (586-class) real mem = 32964608 avail mem = 28450816 using 428 buffers containing 1753088 bytes of memory mainbus0 (root) pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o enabled, memory enabled pchb0 at pci0 dev 0 function 0 pchb0: Toshiba Info Systems (2nd PCI Vendor ID) product 0x0618 (rev. 0x02) vga1 at pci0 dev 8 function 0: S3 product 0x8c01 (rev. 0x06) wsdisplay0 at vga1: console (80x25, vt100 emulation) ohci0 at pci0 dev 11 function 0: NEC product 0x0035 (rev. 0x02) ohci0: interrupting at irq 11 ohci0: OHCI version 1.0 usb0 at ohci0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ESS Technology Inc product 0x1978 (audio multimedia, revision 0x10) at pci0 dev 12 function 0 not configured pciide0 at pci0 dev 16 function 0: Toshiba Info Systems (2nd PCI Vendor ID) product 0x0102 (rev. 0x34) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel wired to compatibility mode pciide0: primary channel interrupting at irq 14 wd0 at pciide0 channel 0 drive 0: wd0: drive supports 16-sector pio transfers, lba addressing wd0: 4126MB, 8944 cyl, 15 head, 63 sec, 512 bytes/sect x 8452080 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 pciide0: secondary channel wired to compatibility mode pciide0: secondary channel interrupting at irq 15 atapibus0 at pciide0 channel 1 cd0 at atapibus0 drive 0: type 5 cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 Toshiba Info Systems (2nd PCI Vendor ID) ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x07) at pci0 dev 19 function 0 not configured Toshiba Info Systems (2nd PCI Vendor ID) ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x07) at pci0 dev 19 function 1 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo lpt0 at isa0 port 0x378-0x37b irq 7 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard opms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot pcppi0 at isa0 port 0x61 midi0 at pcppi0: sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3 pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 pcmcia0: CIS version PCMCIA 2.0 or 2.1 pcmcia0: CIS info: D-Link, DE-660, 118B6603 pcmcia0: Manufacturer code 0x149, product 0x21b pcmcia0: function 0: network adapter, ccr addr 400 mask b pcmcia0: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel ne0 at pcmcia0 function 0 port 0x340-0x34f port 0x350-0x35f ne0: D-Link DE-660 Ethernet ne0: Ethernet address 00:80:c8:b9:33:b0 pcmcia1 at pcic0 controller 0 socket 1 isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.1 apm0: battery life expectancy: 62% apm0: A/C state: on apm0: battery charge state: high charging apm0: estimated 46m biomask c840 netmask c840 ttymask d8ca wscons: wskbd0 glued to wsdisplay0 (console) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) pcmcia0: card irq 5