NetBSD 2.0.2 (MANTIS) #1: Sun May 15 11:32:24 CEST 2005 root@mantis:/usr/src/sys/arch/i386/compile/MANTIS total memory = 1022 MB avail memory = 993 MB BIOS32 rev. 0 found at 0xfd700 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel (686-class), 2793.36 MHz, id 0xf34 cpu0: features bfebfbff cpu0: features bfebfbff cpu0: features bfebfbff cpu0: I-cache 12K uOp cache 8-way cpu0: L2 cache 1 MB 64B/line 8-way cpu0: ITLB 4K/4M: 64 entries cpu0: DTLB 4K/4M: 64 entries cpu0: 32 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel product 0x2580 (rev. 0x04) ppb0 at pci0 dev 1 function 0: Intel product 0x2581 (rev. 0x04) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci1 dev 0 function 0: ATI Technologies product 0x3150 (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 28 function 0: Intel product 0x2660 (rev. 0x03) pci2 at ppb1 bus 2 pci2: no spaces enabled! uhci0 at pci0 dev 29 function 0: Intel product 0x2658 (rev. 0x03) uhci0: interrupting at irq 7 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel product 0x2659 (rev. 0x03) uhci1: interrupting at irq 7 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel product 0x265a (rev. 0x03) uhci2: interrupting at irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: Intel product 0x265b (rev. 0x03) uhci3: interrupting at irq 10 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7: Intel product 0x265c (rev. 0x03) ehci0: interrupting at irq 7 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0xd3) pci3 at ppb2 bus 11 pci3: i/o space, memory space enabled cbb0 at pci3 dev 0 function 0: Texas Instruments product 0x8031 (rev. 0x00) cbb0: NOT USED because of unconfigured interrupt Texas Instruments product 0x8032 (Firewire serial bus, interface 0x10) at pci3 dev 0 function 2 not configured Texas Instruments product 0x8033 (miscellaneous mass storage) at pci3 dev 0 function 3 not configured Texas Instruments product 0x8034 (system subclass 0x05) at pci3 dev 0 function 4 not configured rtk0 at pci3 dev 2 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 7 rtk0: Ethernet address 00:c0:9f:8d:d8:a4 ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Broadcom Corporation product 0x4320 (miscellaneous network, revision 0x03) at pci3 dev 3 function 0 not configured Intel product 0x266e (audio multimedia, revision 0x03) at pci0 dev 30 function 2 not configured Intel product 0x266d (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured pcib0 at pci0 dev 31 function 0 pcib0: Intel product 0x2640 (rev. 0x03) pciide0 at pci0 dev 31 function 1 pciide0: Intel product 0x266f (rev. 0x03) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to compatibility mode pciide0: primary channel interrupting at irq 14 atabus0 at pciide0 channel 0 pciide0: secondary channel configured to compatibility mode pciide0: secondary channel ignored (not responding; disabled or no drives?) Intel product 0x266a (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq pcic0: controller 0 (Intel 82365SL-DF) has sockets A and B pcic0: controller 1 (Intel 82365SL-DF) has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 pcmcia1 at pcic0 controller 0 socket 1 pcmcia2 at pcic0 controller 1 socket 0 pcmcia3 at pcic0 controller 1 socket 1 isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.2 pcic0: controller 0 detecting irqs with mask 0xdeb8: none pcic0: controller 1 detecting irqs with mask 0xdeb8: none pcic0: no available irq; polling for socket events Kernelized RAIDframe activated atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: <_NEC DVD+/-RW ND-6500A, CH53O9J33n, 2.81> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2 wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)